EMAIL CATALOG !
Call Us For Immediate Price and
OR EMAIL US AT:
For many years Young Powertech has been manufacturing Hydraulic Radial Piston Motors for our own use and market. Now, after many years of improvements, with the use of new technology, materials, machine tools we have achieved a quality equal or superior to our competitors. We are now offering our products to the open market.
Young Powertech offers the following types of Hydraulic Radial Piston Motors:
YSTFC (HD) SERIES (80 SERIES, 100 SERIES, 125 SERIES, 200 SERIES, 270 SERIES, 325 SERIES AND 400 SERIES)
This series of motor is based on the “hydraulically balanced piston rod” technology. Offering high efficiency, low noise, constant torque and long life even in the most severe applications
YSTFD (HD) SERIES (100 SERIES, 125 SERIES, 200 SERIES, 270 SERIES, 270 SERIES AND 325 SERIES)
This is a “two-speed” variation of the YSTFC. This series is based on the variable crankshaft which permits the motor to go from maximum displacement to zero during motion with a very smooth and constant torque output. By reducing the displacement and increasing the speed, we can meet many application requirements.
YITM SERIES (YITM 01, YITM 02, YITM 03, YITM 06, YITM 08, YITM 11, YITM 16, YITM 31, YITM 70 AND YITM 100)
This series with the bearing between the piston and crank permits
even higher torque efficiency and smooth operation. With its “hydraulically balanced’ Distributor, this series will deliver a very high volumetric efficiency.
THE YITM Series motors superior performance and high effi- ciency come from the roller bearing connection between the piston and the crankshaft.This reduces the friction to a minimum, increase effi ciency and speed resulting in longer life. This series performance is enhanced due to special piston seals, hydraulically balanced Distributor, resulting in high efficiency and smooth consistent output torque.
With 16 frames and a total of 59 displacements the YITM series is one of the largest and most complete series of radial piston motors available on the market today. With displacements from 3.9 CU. to 978 Cu.ln/Rev (64 to 16039 CC Rev.) torques from 116 to 34.210 Lf-Ft (189 to 46429 Nm) and speed from 0.3 to 900 RPM this series can deliver the performance required of most applications.