SLOPE SENSORS

CLICK HERE FOR PDF SPEC SHEET

YFSI-AN ANALOGIC SLOPE SENSOR

The FSI-AN sensor is a slope analog transducer with 4÷20mA current output.

WORKING

Supply the sensor and read the output current (directly
with a milliamperometer or connecting it to a
PLC with 4÷ 20mA current input).
Attention: the input resistance of the used instrument
(for the measurement) must have a value that allows to the sensor to supply the maximum current.
The maximum output tension of the sensor is “Vsupply - 5.5V“.

FITTING

When you have positioned the sensor, with the long side perfectly in horizontal position, it has an output current
value between 11.9mA and 12.1mA. During the fitting, it is necessary to verify that the output current,
in horizontal position, is between the upon mentioned values. Otherwise, you have to act on the support
slots to place the sensor in a correct way.

TECHNICAL SPECIFICATIONS:

Supply voltage     10 ÷ 32 VDC
Working range From     -105° to +105°
Resolution     1.16°
Current absorbed with     18mA at 12VDC,
output disconnected     20mA at 24VDC
Max output voltage drop     5.5V
Answer time     164 ms
Working temperature     -10°C ÷ +70°C       -40°F ÷ +158°F
Precision @ Tamb 0°÷70°C • 32°÷158°F     ± 1.4°
Precision @ Tamb -10°÷70°C • -50°÷158°F     ± 4.0°
Protection class     IP 67