YMV SERIES

The YMV series motors adapts an advanced GEROLOR gear set designed with disc distribution flow and high pressure.
This motor series uses the “ROLOR” gear type manufactured with most advanced technology and quality available to provide low pressure start up, smooth reliable operation and high efficiency.
The output shaft tapered roller bearings allow for high axial and radial forces. Advanced design in disc distribution flow, which can automatically compensate in operating with high volume efficiency and long life.
Distribution Type: Disc. Distribution
Model: YMV
Displacement: [in3./rev] [19.23~6040], cm3/rev. 315 ~ 990
Max. Operating Pressure: [PSI] [4060], MPa 28
Speed Range: RPM 10 ~ 446
Max. Output Power: [HP] [27], Kw 58
Shaft Seals:                          Standard high pressure shaft seals permit applications in series or without drain line when required.
Low Speed Valving:           These motors are manufactured following strict procedures to reduce tolerances between all components to permit lower speed, higher efficiency and smoother rotation at very low speeds. These motors are not for high speed or low pressure applications.
Free Wheeling:                     These motors are created for applications where freewheeling is required or could be beneficial to the best results of the application and life of the motors and other components.
Special Motors:                    These motors have special options like nickel plated shafts or housings for corrosive environment and applications.
APPLICATION GUIDELINES:
For optimum results the following working conditions are recommended:
*        Oil temperature should be between 20o - 60o C [68o - 180o F]
*        Oil filter of 10 - 20 micron
*        Oil viscosity 42 - 74 mm2 at 40o C
*        Different shafts are used when there is a radial load or not. Check data pages
*        For longer life we suggest the motor at start up, run for a shorter period of time (one hour) at no more than 30% of rated speed and pressure.